top of page

Support For Town Hall

Public·3 members

Where To Buy Dimmer Switches

Download ->->->->

You may be curious to know if installing a dimmer switch is possible to do yourself, and the answer is yes! Follow along as we answer some of the most common questions about dimmer switches and provide step-by-step installation instructions.

Wire-free light switches can be placed on any wall in your house for convenient use of lights. The wireless receiver/transmitter is wired into the circuit and installed in an electrical box in your home. If your light box has no wires or if you want to add another switch for a light, you can simply peel and stick anywhere.

You will need to check what kind of light is connected to the existing on/off switch. So long as the bulb is dimmable, it should be compatible with a dimmer switch. A dimmer switch can be installed anywhere that an existing on/off switch is already installed. We have dimmer switch options for newer neutral wire homes (built mid-1980s or later) and no neutral wire homes (built pre-mid-1980s).

Other dimmers have screw terminals instead of the attached stranded wires to the new dimmer. For the dimmers with screw terminals, strip 3/4 in. of the insulated covering from the wires in the box and bend a loop in each with needle-nose pliers. Place the loop clockwise around the screw terminals and close the loop around the screws with the needle nose pliers. Then tighten the screws.

You may want to have your family room well lit when the kids are playing but then prefer the lights dimmed down when watching a movie or when you have an adult party at home. Dimmers will play a huge role in helping to fine tune the type of lighting that you need for each situation. Learning how to choose a dimmer switch will be critical and will make a huge difference.

Dimmers may vary in how the operate internally. Think about the current of electricity as a solid stream or flow similar to what you get from a faucet. When you adjust the dimmer control, it starts to chop up that signal. The stream of electricity will break up in shorter increments as you slide the dimmer control. This signal chopping essentially reduces the amount of electricity that the bulbs will receive which causes them to dim.

A dimmer switch is a great way to add mood lighting to a room. Dimmers can also be set in a place where you prefer to have a certain amount of light in a room at all times. The desired number of lumens you want from a bulb may not exist and using a dimmer is a great way to fine tune that to where you want it every time.

We have seen dimmers also used to control ceiling fans instead of lights. This is a great way to slow the fan blades down to exactly where you want them without pulling a chain to get a pre-set speed.

There are various dimmer types to consider when deciding how to choose a dimmer switch. However, this is likely the easiest part of your decision making process. The answer is based upon what you have right now in the room. If you are remodeling and have options when it comes to wiring, then you may want to give this a little more thought.

Selecting the bulb that you may use is absolutely critical. The most important thing is to be sure that the bulb you select is compatible with the dimmer you choose. Basically, you need to have a bulb that can be dimmed. I will take you through the bulb types but in reality, you are going to be using an LED bulb since the other bulb types are phasing out. The other important thing to understand is if you are selecting an LED bulb, then you must also choose an LED dimmer.

Each dimmer package will tell you what the maximum watt capacity is for that particular dimmer. For example, it may say 300W LED and 600W Incandescent. A dimmer like this can handle (40) 7 Watt LED bulbs and just (10) 60 watt incandescent bulbs. Therefore, if you are using LED bulbs virtually any dimmer should be fine from a wattage perspective because very few people will have 40 bulbs controlled by one dimmer.

The 4th step in figuring out how to choose a dimmer switch is dimmer control style. The dimmer control style is probably the most fun when learning how to choose a dimmer switch. This is where the personal touch comes in now that you have chosen the bulbs and dimmer type. This is where you should take a little more time.

Think about how you will be using the lights that the dimmer will control. Will they typically be left on at the same brightness level all of the time Will you dim them to different levels often Do you want them to switch on right at the desired dimmed level every time Here are your dimmer control style options.

Smart technology is becoming a part of our lives in many ways. We have smart TVs, thermostats, alarm systems, cameras and more. Now you can control your lights with smart technology and smart dimmer switches are available too.

With both bulb and dimmer technology changing so quickly, I predict that at some point in the future every light switch will be controlled by a dimmer. The ability to adjust the light levels in every room depending upon your need is an important part of home décor. Lighting was once ignored and now is viewed as a critical element in bringing an added dimension to your home.

Do LED lights require a special dimmer switchLED lights do need to be compatible with the dimmer switch. You must use an LED dimmer switch but also your LED bulbs must be dimmable.

The Lutron Maestro LED+ Dimmer Switch ticks all the boxes for a great dimmer switch. You can use it in both single-pole and multi-direction applications, and it works with all types of dimmable light bulbs. The Lutron Maestro LED+ also offers a variety of useful features, including a fade-to-off function. For a less expensive model, consider the GE Rotating Dimmer Switch, which has a traditional rotary design and comes with two colored knobs to match your decor.

Modern dimmer switches work by quickly switching the light circuit on and then off. When this happens, electricity diverts away from the light bulb, which reduces the amount of electrical current flowing through the light bulb. The result is that less light emits from the bulb.

Contemporary dimmer switches work much like if you turned the switch on and off yourself. Dimmer switches function extremely fast by turning off a light on and off approximately 120 times a second. They use a transistor called a TRIAC. The TRIAC turns off when no current flows through it.

The dimmer switches are made from solid metal with a diamond-cut knurled knob that feels and looks amazing in every room. They are available in a range of metal finishes that you can mix and match. Choose the dimmer combination that suits you best! Our dimmer switches are designed to work in harmony with our hardware & lighting ranges, so you can create exquisite and relaxing environments. They work perfectly in both commercial and residential spaces.

You always need to turn off electricity to the switch where you are installing the dimmer before starting work, then take off the cover plate for the switch or switches by removing the screws that hold the cover plates in place.

You need a single-pole dimmer if there is only one switch to control the light in the room. You need a three-way dimmer for two switch locations and a four-way dimmer when you have three switch locations.

Great design stands the test of time. Our Decora brand has set the industry standard for style and performance. Decora Slide, IllumaTech and SureSlide dimmers offer contemporary elegance and add a finishing touch to any room.

The benefits of using this dimmer include smooth operation for precise dimming, low level starting and flicker-free operation when used with incandescent and compatible dimmable LED/CFL bulbs. It is designed to provide optimal performance when used with dimmable LED or dimmable CFL bulbs. Even if you are currently using incandescent bulbs, you can future proof by installing the Universal Dimmer to ensure compatibility in the future with dimmable LED/CFL bulbs. For quality assurance the Universal Dimmers have been evaluated and listed specifically for use with dimmable LED and dimmable CFL loads in addition to incandescent.

Universal dimmers are designed to work with dimmable LED, dimmable CFL, incandescent and halogen bulbs. Some universal dimmers are also designed for Magnetic Low Voltage (MLV) and Electronic Low Voltage (ELV) loads. Leviton recommends only LED and CFL bulbs that are labeled as DIMMABLE be used with the Universal Dimmer. The packaging on the bulb should identify it as dimmable.

No. Agency listings associated with Universal LED/CFL dimmers have specific test requirements to safely control and operate dimmable LED and CFL bulbs. We cannot recommend the use of an incandescent dimmer with dimmable LED/CFL bulbs.

Electronic Low Voltage (ELV) dimmers incorporate reverse-phase dimming control, which tends to provide enhanced performance with dimmable LED bulbs. Before using an ELV dimmer with LED/CFL bulbs, ensure the dimmer indicates that it is listed for use with these bulb types. These dimmers do require connection to a neutral wire, which is often not available in older construction. In addition, Electronic Low Voltage dimmers are typically a more expensive solution.

The selector switch has an optional programming mode. The programming mode option is used to change the factory settings for minimum light level. For example, the dimmer settings can be changed to eliminate any noticeable flicker or users can re-calibrate the pre-set to ensure the bulb starts at the lowest light level.

It may depend on the bulb. If your dimmer has a soft on and off feature where it fades the lights on and off as opposed to abruptly turning them on like a regular switch, there could be a slight delay before some bulbs will turn on. While most will operate fine with the soft on and off and changes to dimmer settings, there are some bulbs that have a built-in delay during those events and it may take a moment or so before they will turn on or respond to changes in dimmer settings. 59ce067264

bottom of page